Search and Browse
Download
Enter Data
|
Assay Method Information |
|
| | PDE4 Inhibition Assay |
| Description: | The assay buffer was prepared by diluting 5× supplied Tween-based buffer in 1:5 in water to make 1× buffer. Add desired additive to buffer (DTT or MnCl2). In a separate 96-well polypropylene plate, compound dilutions were prepared in assay buffer. Separate microcentrifuge tubes were prepared of PDE4B and PDE4D according to assay template in assay buffer. The tubes were kept on ice. The enzyme concentration shown on the template were diluted by 1:4. FAM-cAMP substrate solution was prepared according to assay template. 5 μl compound was transferred from polypropylene plate into black 384-well plate. This plate was centrifuged briefly to make sure all 5 μl is on the bottom. Up to 80 μl of prepared PDE4B enzyme solution was transferred into alternate wells on row N of 384-well plate starting from cell N1. Up to 80 μl of prepared PDE4D enzyme solution was transferred into alternate wells on row 'O' of 384-well plate, starting from cell O2. cAMP substrate solution was transferred into bottom row of separate 96-well plate. 5 μl of enzyme solution from the "reservoir" row (N or O) was transferred to each of the wells containing compounds, per layout map. Next, 10 μl of cAMP substrate was transferred to these wells. The order of substrate-first or enzyme-first can be switched depending on what is optimal. The final cAMP concentration was 100 nM in the reaction. 20 μl of assay buffer was pipetted into 4 separate wells these are the blanks. The plate was sealed with an aluminum strip and incubated at 30° C. for 90 minutes. A TR-FRET solution was prepared. 4 ml of 1× IMAP Buffer A was added to 6 ml of IMAP Buffer B. 25 μl (1/800 of 20 ml) of binding beads was added to this and mix by inverting. 60 μl of this mixture was pipetted into 2 of the wells containing the "blank" assay buffer. Next, 49.7 μl (1/400 of remaining volume) of Tb donor solution was added to the remaining TR-FRET solution and mixed by inverting. 60 μl of this solution was pipetted into remaining 2 blank assay buffer-containing wells. The TR-FRET solution was poured into a pipette boat and a multichannel pipette was used to drop 60 μl of solution into all assay wells. The wells were covered with a foil strip and incubated for at least 3 hours or overnight protected from light (e.g. in a drawer) at room temperature. The plate was read on the Envision Reader: Emission 1: 520/Emission 2: 486/Exc: 340. Mirror: Umbelliferone (UV). |
| Affinity data for this assay | |
|---|---|
| If you find an error in this entry please send us an E-mail | |
|
Home |
| |
Search |
| |
Deposit |
| |
SiteMap |
| |
About us |
| |
Email us |
| |
Info |
|
©2000 BindingDB. All rights reserved. |
|||||||||||||