BindingDB logo
myBDB logout

Assay Method Information

Assay Name:  Surface Plasmon Resonance (SPR) Assay
Description:  Exemplary compounds of the application were dissolved in 100% DMSO at 10 mM, assayed fresh, and then stored at −20° C. for repeat studies and other experiments. Full length WDR5 with an N-terminal His tag and C-terminal AviTag (Avidity Inc.) was expressed in E. coli with coexpression of BirA to biotin labelled protein in vivo. Purification of the protein was performed using Ni-NTA. The purified WDR5 protein has a molecular weight of 41976 Da.SPR studies were performed using a Biacore T200 instrument (GE Health Sciences Inc.). Biotinylated WDR5 protein (approximately 3000 RU) was stably captured to streptavidin coupled SA chips according to the manufacture's protocol (GE Health Sciences Inc.). The running buffer used was HBS-EP (20 mM Hepes pH 7.4, 150 mM NaCl, 3 mM EDTA, 0.05% P-20) plus 5% DMSO with a flow rate of 40 μl/min. For SPR analysis, 5 different concentrations of each exemplary compound of the application were sprayed into 96 or 384 well plates using an HP D300 digital dispenser. The concentration ranged from about 195 nM to about 12 nM in a two-fold series. Concentration ranges were adjusted higher or lower for weaker or more potent compounds respectively when necessary. For the KD determinations, single cycle kinetic analysis was performed with an on time of 60 seconds, and an off time of 300 or 600 seconds. Curve fitting and KD calculations were performed with the Biacore T200 Evaluation software (GE Health Sciences Inc).
Affinity data for this assay
 

If you find an error in this entry please send us an E-mail
   
    

Home

|

Search

|

Deposit

|

SiteMap

|

About us

|

Email us

|

Info

 
Last update November 1, 2007
©2000 BindingDB. All rights reserved.